NepalHRM
Free Salary Tax Calculator

Nepal Salary Tax Calculator: PF, CIT, SSF and TDS

Enter a gross salary and read the whole breakdown: PF and CIT or SSF on basic, monthly TDS on the current IRD slabs, net take-home, and the total cost to the employer.

  • FY 2083/84 slabs
  • No sign-up
  • Nothing leaves your browser

Nepal income tax, FY 2083/84

Slab table applied
FY 2083/84
First NPR 1,000,000
1%
Top marginal rate
29%
Retirement deduction cap
NPR 500,000

PF + CIT and SSF are separate contribution systems in Nepal. Select the one applicable to your company or employee. PF, CIT, and SSF are all calculated from Basic (not Gross).

Contribution System

New for FY 2083/84: the separate single and married (couple) slabs have been merged into one table for all resident individuals. The 1% band now runs to NPR 10,00,000 and the top rate is 29% (was 39%).

Monthly Gross
NPR
Basic + Allowance (60% Basic)Gross = Basic + Allowance
Basic salary60 % of gross
Allowance / DA40 % of gross
30%Recommended 40-60%100%

Monthly Net Take-Home

NPR 70,050

Gross NPR 75,000, employee-side deductions only

Employee Deductions

Deducted from salary
Gross salaryNPR 75,000
Basic (60% of Gross)NPR 45,000
Allowance / DA (40% of Gross)NPR 30,000
SSF employee (11% of Basic)- NPR 4,950
TDS (monthly)NPR 0
Net take-homeNPR 70,050

Annual TDS estimate ~ NPR 0

TDS is calculated based on annual taxable income (Gross - PF/CIT/SSF deductions) against the unified FY 2083/84 Nepal tax slabs.

Employer Cost

Paid on top of salary
Gross paid to employeeNPR 75,000
SSF employer (20% of Basic)NPR 9,000
Total employer costNPR 84,000

Total SSF deposited monthly: NPR 13,950 (31% of Basic). Employee NPR 4,950 (11%) + employer NPR 9,000 (20%).

The employer's 20% is paid on top of gross salary. It never reduces the employee's take-home.

Run a full payroll in the live demo

This calculator is for demo estimation only. Actual payroll depends on company policy, salary structure, tax category, and applicable rules. NepalHRM applies the precise rules per employee in production.

Using the calculator

Five Inputs, One Net Figure

The calculator runs the same tax and contribution logic the NepalHRM payroll engine does, so the estimate here and the payslip there agree.

  1. 1

    Pick the contribution system

    Choose PF + CIT or SSF, whichever the employer is enrolled in. They are alternatives, not additions, and they tax differently: SSF assessees have the 1% first band waived.

  2. 2

    Enter monthly gross

    Type the gross monthly salary in NPR, the figure on the appointment letter before any deduction.

  3. 3

    Set the basic split

    Move the basic percentage to match your salary structure. PF, CIT and SSF are all assessed on basic, not on gross, so this changes every deduction below it.

  4. 4

    Add CIT, if any

    CIT is voluntary and reduces taxable income alongside PF, up to the statutory ceiling. Raising it lowers TDS without changing gross salary.

  5. 5

    Read net pay and employer cost

    Net take-home, each deduction, monthly TDS and the employer's total cost are shown together. Open the slab breakdown to see the tax band by band.

Tax slabs, FY 2083/84

Nepal Income Tax Slabs and Rates

Marginal rates on annual taxable income, effective Shrawan 1, 2083. FY 2083/84 merged the separate single and couple schedules, so one table now applies to every resident natural person and no marital status is asked for.

Annual taxable income (NPR)PF + CITSSF
Up to 1,000,0001%0%
1,000,001 – 1,500,00010%10%
1,500,001 – 2,500,00020%20%
2,500,001 – 4,000,00027%27%
Above 4,000,00029%29%

The first band is the 1% social security tax. It is waived for SSF assessees because the Social Security Fund already covers it. Retirement contributions reduce taxable income only up to the lowest of the actual contribution, NPR 500,000, or one-third of assessable income.

What the calculator computes

PF, CIT, SSF and TDS, One at a Time

Four deductions with four different rules. This is what each one does to a Nepali salary, and where the calculator applies it.

01

PF (Provident Fund)

10% of basic from the employee, matched by 10% from the employer. The employee's half is deducted from the salary; the employer's half is paid on top of it, so it lowers taxable income without lowering gross.

02

CIT (Citizen Investment Trust)

Voluntary retirement saving that sits alongside PF. It comes out of pay and goes into the employee's own fund, and because it is deductible, every rupee added lowers taxable income until the ceiling is reached.

03

SSF (Social Security Fund)

The alternative to PF + CIT: 11% from the employee and 20% from the employer on basic, 31% in total. Employers enrolled in the scheme use this instead of PF, and their staff pay no 1% social security tax.

04

TDS (tax deducted at source)

Income tax withheld monthly rather than paid in a lump at year end. The calculator assesses annual taxable income against the slabs above, then divides by 12 for the figure that appears on a payslip.

05

The deduction ceiling

PF, CIT and SSF reduce taxable income only up to the lowest of the actual contribution, NPR 500,000, or one-third of assessable income. Above that the contribution still happens; it just stops saving tax.

06

Basic, not gross

Nepali salary structures split gross into basic plus allowances, and every statutory contribution is assessed on basic. A structure with a low basic percentage produces a smaller PF, CIT and SSF, and a larger taxable income.

One estimate here · every payslip in the app

The Same Maths, Run for Every Employee

This page answers one salary at a time. NepalHRM holds the rules once in payroll settings, then applies them to the whole company every month and produces the reports the IRD asks for.

  • PF, CIT and SSF are configured once in payroll settings, then applied per employee on every run.
  • The CIT Optimizer shows how much tax an employee can still save by raising CIT before payroll closes.
  • Salary sheet, PF, CIT and eTDS reports come out of the same run, in IRD format.
  • Periods follow the BS fiscal year, so slab changes land with the year rather than in a spreadsheet.
See how NepalHRM payroll works
The NepalHRM tax planner showing annual gross, current annual tax, the CIT contribution that minimises it, and the saving still capturable this year.
FAQs

How Nepal Salary Tax Works

Annual taxable income is gross salary minus allowable deductions (PF and CIT, or SSF, capped at the lower of NPR 500,000 or one-third of income), assessed against the marginal slabs. From FY 2083/84 a single unified table applies to every resident individual, the separate single and married slabs having been merged: the first NPR 1,000,000 at 1% (the social security tax, waived for SSF assessees), then 10% to 1,500,000, 20% to 2,500,000, 27% to 4,000,000 and 29% above that. The calculator applies these slabs and divides the annual figure by 12 for the monthly TDS. Open "Show tax slab breakdown" to see each band.

They are two different social-security setups. Under PF+CIT the employee and employer each contribute 10% of basic to the Provident Fund, plus an optional CIT contribution. Under SSF the employee contributes 11% and the employer 20% of basic to the Social Security Fund. Both reduce taxable income, but the rates and the benefits differ, and SSF assessees are exempt from the 1% first band. The compare view shows net pay and employer cost side by side.

On basic salary, not gross. Nepali salary structures split gross into basic and allowance, and all statutory contributions (PF, CIT, SSF) are assessed on the basic component. The calculator lets you set the basic percentage to match your company's structure.

Yes. It uses the FY 2083/84 slabs, effective Shrawan 1, 2083, and the standard contribution rates. That year's budget raised the 1% band to NPR 1,000,000, cut the top rate from 39% to 29%, and removed the separate married and couple slabs, so no marital-status selection is needed any more. Actual payroll also depends on company policy and any additional deductions such as insurance premiums or a remote-area allowance. NepalHRM applies the exact per-employee rules when it runs your real payroll.

This tool is for a quick estimate. Generating payslips, filing eTDS, handling PF, CIT and SSF deposits and running bank transfers for every employee automatically is what the full NepalHRM platform does. Companies with up to 10 employees use it free.

More free tools

While You're Here, Try These Too

Every NepalHRM tool is free, runs in your browser and needs no account.

Automate This for Every Employee, Every Month

This calculator runs the same tax and SSF logic as the product. Inside NepalHRM it runs for your whole payroll automatically, with TDS totals ready for filing.

  • FY 2083/84 tax slabs
  • PF, CIT & SSF handled
  • eTDS-ready totals
  • Free onboarding